Labrador Retriever Silhouettes with Bridged Outlines: 20 Labs, a Puppy and a Name Plaque

Every drawing in this Labrador silhouette set comes twice. One file is a solid black shape with the details cut through it as thin white lines, and the other traces the same dog as a hollow outline. The drawings lean on what makes a Lab read as a Lab even in plain black: a broad head with a square muzzle, short ears folded flat against the cheeks, a deep chest and a thick tail.

Twelve Labs on the move and at rest

The full-body designs open with the classic side-on stance (01) and two sits, one facing you square with a pale blaze down the chest (02) and one side-on with the head lifted (03). Then the set gets moving: an easy trot (04), a full-stretch run with all four legs off the ground (05) and a play bow with the tail up and tongue out (10).

Two designs give the retriever a job. In 06 a Lab stands four-square with a ball in its mouth, and in 11 one swims with its head above three wavy water lines, ball still in its jaws. The quiet ones are a Lab lying down with its head up (07), one curled nose to tail asleep (08) and a puppy sitting with one front paw raised (09). Design 12 shows the dog from behind, looking back over its shoulder.

Heads, frames and a blank plaque

Three are straight portraits: a side profile of the head and neck (13), a smiling front face with the tongue out (14) and a three-quarter head carrying a ball (15). The other five put the Lab inside a shape. There’s a profile set into the big pad of a paw print (16), a head above an empty rectangular plaque (17), a profile framed by a heart (18), a head in a laurel wreath (19) and a Lab peeking over a ledge with both front paws hanging down (20).

Solid or outline, and why the outline has gaps

In the solid files the white details inside the dog, such as eye rims, ear edges and leg contours, are openings. Cut that from paper and each opening frees a small loose piece, which is why the Read-Me treats the solid version as decorative cutout art. Use the solid one for prints, stickers or anywhere a black Lab silhouette should read as one bold shape.

The outline version draws the dog as a solid black line around an empty middle, with short breaks in that line. Those breaks are the paper bridges: they keep the paper inside the line joined to the paper outside, so leave them in when you edit. The guide puts them at about 1.5 mm (0.06 in) when a design is 4 inches wide, and they scale with the drawing, so a Labrador outline shrunk to 2 inches has bridges about half that. No one has test-cut these files, so cut one on scrap at your final size first.

Printing the PDF pages

Both PDFs follow the same order. After the cover, each design gets a full page in solid (pages 2 to 21) and in outline (pages 22 to 41). Next come the solid sheets, five pages at four designs each and four pages at six, then the same 4-up and 6-up sheets in outline, and a guide page closes the file. Print at Actual Size / 100%. The lines print black; the dark navy in the product photos is only display color.

For your own layouts, the PNGs are 2400 pixels square with a transparent background and the dog sitting inside a margin. The SVGs use a 1200 x 1200 canvas without real-world units, so set the width after you import them. The DXF files hold closed boundary shapes, not single-line engraving paths.

Questions

Can I add my dog's name to the plaque?

The plaque under the Lab in design 17 is an empty frame, and none of the 20 designs carry any lettering. Type the name in your own design software and place it inside the frame before you print or cut.

What size do the DXF files open at?

Every DXF is drawn in millimeters with the design exactly 4 inches (101.6 mm) wide. The guide gives the outline bridges as about 1.5 mm at that width, and they shrink or grow with the design when you resize it.